
S26 Nano Compound Fine
S26 is a high-end nano-compound with unique lustre properties for the polishing of new and used coatings. Light to moderate paint scratches and blemishes can be polished in one step without swirls or holograms.
S26 is a high-end nano-compound with unique lustre properties for the polishing of new and used coatings.
Light to moderate paint scratches and blemishes can be polished in one step without swirls or holograms.
S26 leaves a unique and brilliant deep shine. Ideally suited for end-finishing work on scratch-resistant nano-coatings!
Extremely soft polishing pads should not be used with this compound. Generally, we recommend the processing of S26 with the Scholl orange polishing pad.
When polishing deeper scratches the polishing paste can be processed with a SOFTouch Top Wool pad.
Thanks to Intelligent Powder Technology S26efficiently removes fine micro-scratches, swirl marks and holograms on dark paints.
Advantages
Ease of use
Deep wet look
Unmatched gloss
Precise reflexions
For more information on the iPT 'intelligent Powder Technology' visit: Knowledge Base - Abrafix - iPT
Application examples
To remove fine scratches (SOFTouch Top Wool)
To remove polishing swirls (Orange Foam Pad & Orange Waffle Foam Pad)
To remove hologram ( Orange Foam Pad & Orange Waffle Foam Pad )
To improve gloss (Orange Foam Pad & Orange Waffle Foam Pad)
To reveal the metallic flakes in the paint (Orange Foam Pad & Orange Waffle Foam Pad)
To add a shimmering wet look (Orange Foam Pad & Orange Waffle Foam Pad)
Suitable for use with dual action (DA - 2000-10000 RPM) and rotary (1000-2000 RPM) polishing machines or by hand.
Cut: Fine (2/6)
Gloss: Extreme (6/6)
Sanding Paper: P2500
Application by hand
For the efficient application of the nano compound we recommend the use fo SCHOLL White Puck. They considerably reduce polishing time and prevent the risk of micro-scratches from rough polishing cloths or pads.
First apply S26 onto the white hand puck and a small amount onto the surface to be polished.
With firm pressure, polish using circular motions.
If the polished area becomes too dry apply a fresh amount and continue polishing. Avoid using too much polishing paste as this can cause a film which impairs its effectiveness.
Once the defect is removed we recommend wiping the area with our super-soft and seamfree MicroPLUS polishing cloth.
After using S26 Nano Compound, the polished area should be sealed with one of our Tagged under Abrafix Fine Cut Extreme Gloss Anti Hologramm P2500

