S3 Edition Gold is a single stage, high performance rubbing compound that can remove more serious defects in seconds.
S3GOLD has been designed specifically for paint finishing work on scratch resistant surfaces, including UV cured paints.
When worked fully with little pressure at the end of the buffing cycle, it will finish to an incredible high gloss.
1 compound and 1 polishing pad for virtually any finishing work on freshly painted surfaces.
Free of silicone, wax and toxic solvents S3 GOLD is recommended for nearly all paint finishing applications on fresh paints. With S3 Edition Gold there is virtually no dust contamination and it won't stick to paint, even on hot surfaces.
S3 Edition Gold is also a highly effective, single stage compound for lacquered wood, plastic gelcoats and polycarbonates. It gives an unrivaled finish in a single step process and is fast and clean to work with.
S3GOLD can be used with all Scholl Concepts polishing pads.
Advantages
•Grit P1500 sanding marks can be removed in seconds
•Maximum lustre with maximum removal rate
•No drying of the paste when polishing - product stays 'wet'
•Minimal dust
•Intelligent Powder Technology (iPT)
•Very low heat generated thanks to our Spider Pad
•Best suited for all paint finishes - including scratch-resistant - UV coatings
•Paste is free of waxes, silicones and smelling solvents
•Ideally suited for polycarbonate and wood finishing applications
Application examples
•Depending on the application of the S3GOLD can be used:
•To remove sanding marks (P1500/P2000) made after correction of orange peel, paint runs, dust nibs, light to heavy scratches (SOFTouch Top Wool & Sandwich Spider Pad)
•To remove moderate to heavy scratches (SOFTouch Top Wool & Sandwich Spider Pad)
•To remove moderate to fine scratches  (Sandwich Spider Pad & Purple Foam Pad)
•To remove polishing swirls (Orange Foam Pad or Orange Waffle Foam Pad)
•To remove hologram (Orange Foam Pad or Orange Waffle Foam Pad)
•Suitable for use with dual action (DA - 2000-10000 RPM) and rotary (1000-2000 RPM) polishing machines or by hand.
•Cut: Heavy (5/6)
Gloss: High (4/6)
Sanding Paper: P1500

Application by hand
For the efficient application of S3GOLD we recommend the use fo SCHOLL White Puck. They considerably reduce polishing time and prevent the risk of micro-scratches from rough polishing cloths or pads.
•First apply  S3GOLD  onto the white hand puck and a small amount onto the surface to be polished.
•With firm pressure, polish using circular motions.
•If the polished area becomes too dry apply a fresh amount and continue polishing. Avoid using too much polishing paste as this can cause a film which impairs its effectiveness.
•Once the defect is removed we recommend wiping the area with our super-soft and seamfree MicroPLUS polishing cloth.
•After using S3GOLD, the polished area should be sealed with our long-lasting Premium Wax.
•Tagged under Abrafix 1 Step Heavy Cut High Gloss P1500